A S Shoe Accessories Pvt. Ltd
A S Shoe Accessories

 

NUOVA S.I.V.A.M S.p.A, Italy

NUOVA S.I.V.A.MIndex

Synthetic Sole Finishing Products


a) RESIN 35/C

It is a PU resin concentrate. It can be diluted in organic solvent to make spray/ dipping solution (Lacquer). This product has excellent gloss and flex properties. It is used as a binder for PU covering spray/ dip.
Aplication: Upper Finish of PU Foam and PU soles

b) RESIN BRUSHABLE FAT S/C

It is an organic solvent solution of brushable resin which is used mainly as a top finishing spray to give a shading effect. It also gives very high gloss when buffed with abrasive waxes.
Aplication: Upper Finish of PU Foam and PU soles


2. Covering Pigment Paste

(Colour concentrates, solvent based). These are colour ingredients of covering PU spray. The pigments are finely grounded. These enhance the feel of the finish. They have excellent covering power also.
Aplication: Mainly in PU industries for covering.

  • WHITE FZC 000
  • YELLOW FZC 051
  • OCHRE FZC 052
  • RED OXIDE FZC 055
  • BLUE FZC 056
  • RED FZC 58
  • BLACK FZC 059


Dosing Pigments

Colour ingredients of Polyurethane foam system. At present we have two different viscosity ranges to suit the application. Viscosity 500 to 1000 cps for those feeding pigment through pump. Viscosity above 1500 cps for those feeding pigment directly into PU tank. We also have pthalate and non pthalate grades. We can match any colour and viscosity on demand. Our pigments are very finely grounded and have very good covering power.

Dosing Pigments

  • COLORPAST BLACK FLL 908
  • COLORPAST BEIGE FLL 103
  • COLORPAST BROWN FLS 846
  • COLORPAST 010 WHITE FLS 060
  • COLORPAST OCHRE FLS 330
  • COLORPAST YELLOW FLS 340
  • COLORPAST RED FLS 435
        * We can produce any colour of any viscosity according to customer requirement.


Release Agents

1. SISTAC 100

100% Silicone oil having very good releasing property. Mainly used as release agent for PU sole. Comsumtion is about 4 to 6% depending on the spray gun size. It is also very easily washable after release. This product is designed mainly for Polyester based Polyurethane System.

Packaging: 50 Kg

2. SISTAC KV

It is a 100 % Silicone Oil having all the properties of SISTAC 100. In addition, it is mainly designed for Polyether based Polyurethane system.

Packaging: 60 Kg

3. SISTAC HSIP / I

Solvent based silicone solution. Mainly designed for fine spray (0.2 mm gun). High solid silicone contentand very high performance releas agent.